| Installation |
Step 1. Hearth: Make sure floor is clear of
dust or debris. Find center point of fireplace
and hearth. Apply construction adhesive to
back of hearth and gently put hearth in
place.
dust or debris. Find center point of fireplace
and hearth. Apply construction adhesive to
back of hearth and gently put hearth in
place.
Step 2. Left Leg: Apply construction
adhesive to back of left leg (metal tab on top
left as you look at leg). Carefully set bottom
of leg in place and then gently but firmly
apply pressure.
adhesive to back of left leg (metal tab on top
left as you look at leg). Carefully set bottom
of leg in place and then gently but firmly
apply pressure.
Step 3. Right Leg: Repeat step 2 with Right
leg.
leg.
Step 4. Header: Steel backer should be
away from the fireplace. Apply silicone to
header piece. Place header and then gently
but firmly apply pressure. Make sure all
pieces are aligned. Congratulations you are
done installing your surround!
away from the fireplace. Apply silicone to
header piece. Place header and then gently
but firmly apply pressure. Make sure all
pieces are aligned. Congratulations you are
done installing your surround!
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Easy to Order! Easy to Install! |
| Granite Marble Limestone Ceramic |
| 24/7 Online Pricing 2 Week Lead Time |
| Copyright 2004 Gallerystone, Inc. All rights reserved |